Ox editor

Ox is a code editor that runs in your terminal.

About The Project

Ox is a code editor. It was written in Rust using ANSI escape sequences. It assists developers with programming by providing several tools to speed up and make programming easier and a refreshing alternative to heavily bloated and resource hungry editors such as VS Code and JetBrains. Ox is lightweight so it can be used on older computers.

Bear in mind, this is a personal project and is nowhere near ready to replace your existing tools just yet.

It runs in the terminal and runs on platforms like Linux and macOS but doesn't work on Windows directly (it works if you use WSL) due to a lack of a good command line. There are many text editors out there and each one of them has their flaws and I hope to have a text editor that overcomes many of the burdens and issues.

Ox is not based on any other editor and has been built from the ground up without any base at all.

What features does Ox have and why should I use it?

Ox aims to be an editor that takes features from some of the most popular editors out there, gaining the best of all worlds.

Vim http://vim.org: Vim provides a plugin system for adding features to it as it is very minimal and only provides basic text editing functionality by default. It is quite extensive and has its own programming language for configuring and writing plugins for it. It has a steep learning curve due to being a “modal” text editor, having special modes for editing text. Ox is easier to use than Vim because it doesn’t have modes where the keyboard is repurposed, however it takes the idea of being a keyboard-only editor and being able to act just like an IDE after some configuration.

Nano https://www.nano-editor.org/: Nano is an editor that is very simple to grasp due to its intuitive key bindings such as Ctrl+S to save and Ctrl+? for the help menu etc. Ox took the idea for the key bindings from this editor, they are simple to remember, Ctrl+F for “Find”, Ctrl+Q for “Quit”, meaning that Ox doesn’t have as steep a learning curve.

Micro https://micro-editor.github.io/: Micro has a plugin system that is programmed with a language called Lua however I can’t seem to find any up to date plugins for it and it lacks features such as a file tree. It is micro that inspired me to add mouse functionality and other features.

Emacs https://www.gnu.org/software/emacs/: Emacs is still actively used today due to its freedom to modify and change the source code. Ox took the idea for the customization and extensibility of Emacs and made a configuration system where you can change the colours and appearance of the editor.

Xi https://xi-editor.io/: Xi is also written in Rust but is purely a backend at the moment, I decided to make Ox both a frontend and a backend because Xi has many frontends, but most of them are broken and it lacks a lot of features.

Kiro https://github.com/rhysd/kiro-editor: Kiro is an amazing text editor written in Rust and adds features such as Unicode support, a nicer colour scheme and small things like resizing and it is a very inspiring editor. Ox took the ideas for the improvements from Kiro, however implemented them differently. Kiro’s source code also seems to be quite advanced in some areas, so I decided to keep Ox as simple as I could.

Built With

Ox is super minimal and aims to use as few dependencies as possible, allowing for rapid compile time and low risk of breakage.

• Rust language
• Crossterm
• Unicode-rs
• Clap
• Regex
• Ron
• Serde
• Shellexpand

Getting Started

You can currently only build Ox from source. While this may sound daunting to many people, it really isn't that hard and takes 1 minute worst case scenario!

Prerequisites

Because Ox is written in Rust, you must have a modern and working version of rustc and cargo.

On Arch Linux, you can run this command:

sudo pacman -S rustup
rustup toolchain install stable

If you are not using Arch, you can easily set it up on other distros by running the distro-neutral command:

curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh
/usr/bin/rustup toolchain install stable

You must have curl installed in order to run this command.

Installation

Icons

Ox uses NerdFonts to display icons. You can install nerdfonts from https://nerdfonts.com If you use Arch Linux, you can install it by installing the package ttf-nerd-fonts-symbols-mono. There is a potential that you will need to add it to your terminal emulator.

Manual

cargo install --git https://github.com/curlpipe/ox

Arch Linux

Install ox-bin or ox-git from the Arch User Repository.

That's all there is to it!

Fedora/CentOS

Install ox from the COPR Repository:

sudo dnf copr enable atim/ox -y
sudo dnf install ox

Homebrew

Install ox from Homebrew core tap.

brew install ox

MacPorts

On macOS, you can install ox via MacPorts

sudo port selfupdate
sudo port install ox

Usage

Opening files in Ox

At the moment, you can open ox by using the command

ox

This will open up an empty document.

If you wish to open a file straight from the command line, you can run

ox /path/to/file

To open and edit a file.

You can also open a file from within Ox by using the Ctrl + O Key binding

If at any time, you wish to create a new file, you can use Ctrl + N to do so.

You can find more command line options for Ox by typing:

ox --help

Moving the cursor around

You can use the arrow keys to move the cursor around

You can also use:

• PageUp - Go to the top of the document
• PageDown - Go to the bottom of the document
• Home - Go to the start of the current line
• End - Go to the end of the current line

Editing the file

You can use the keys Backspace and Return / Enter as well as all the characters on your keyboard to edit files!

Ox is controlled via your keyboard shortcuts. Here are the default shortcuts that you can use:

Configuring Ox

Ox features a configuration system that allows modification and personalization of the editor.

By default, Ox will look for a file here: $XDG_CONFIG_HOME/ox/ox.ron or ~/.config/ox/ox.ron.

Ox's configuration language is RON.

There is a default config in the 'config' folder. You will have to either download it and place it in the default config directory or create your own using the example ones as a reference. If you don't have a config file, don't worry :), Ox will just ignore it if you don't have one.

If you wish to specify the configuration file path, you can do so using the '--config' option (or '-c' if you prefer). For Example:

ox --config /path/to/my_config.ron file_to_edit.txt

Roadmap

You can see the tasks.todo.md file to see my full plans for the future of the editor!

Here is the current summary

• Initial Research (0.1.0, 0.1.1) [741 lines]
• Basic editing functions (0.2.0)
• Line numbers (0.2.0)
• Searching (0.2.0) [1040 lines]
• Undo and Redo (0.2.1) [1282 lines]
• Input bug (0.2.2) [1278 lines]
• Good command line interface (0.2.3)
• Config files (0.2.3)
• Replacing text (0.2.3) [1549 lines]
• Syntax highlighting (0.2.4) [1894 lines]
• Tabs for multitasking (0.2.5) [2050 lines]
• Macros (0.2.6) [3414 lines]
• Tweaks (0.2.7) [3241 lines]
• Mouse support (0.2.8)
• Auto indentation (0.3.0)
• Prettifier / Automatic code formatter (0.3.0)
• Built In linter (0.3.0)
• Auto brackets (0.3.1)
• Auto complete (0.3.2)
• File tree (0.3.4)
• Start page (0.3.5)

License

Distributed under the GNU GPLv2 License. See LICENSE for more information.

Contact

You can contact me on Discord at curlpipe#1496. I'll be happy to answer any questions you may have!

Acknowledgements

• Curlpipe (Luke), for actually building Ox
• Spike, for the logo
• The community, for the ideas and suggestions